C&G 2382 (BS7671 18th Edition) Amendment 4 Practice Questions – Set 1
Results
Well Done, You Passed!
You’ve demonstrated a good understanding of the key changes introduced in BS 7671 Amendment 4 and how they affect electrical installations.
Keeping up to date with changes to the Wiring Regulations is an important part of working safely and remaining compliant. Your result shows you’re keeping your knowledge current.
Want to stay ahead of the latest regulations?
Our City & Guilds 18th Edition courses cover the current edition of BS 7671, including Amendment 4, helping you understand the latest requirements and apply them with confidence.
Find out more here:
https://www.pragmatic-consulting.co.uk/training-courses/electrical/
Not Quite This Time
Don’t worry if you didn’t get the score you were hoping for. Amendment 4 introduces a number of important updates, and it can take time to become familiar with the latest requirements.
Take a look at the questions you found challenging, refresh your knowledge, and have another go. Every attempt helps build your confidence and understanding of the latest Wiring Regulations.
Looking to get up to speed with Amendment 4?
Our City & Guilds 18th Edition courses are designed to help electricians understand the latest changes to BS 7671, stay compliant, and apply the regulations confidently in the workplace.
Find out more here:
https://www.pragmatic-consulting.co.uk/training-courses/electrical/
#1. Which one of the following was not a purpose for the publication of Amendment 4 to BS 7671?
#2. BS 7671 does not include requirements for
#3. A Prosumer’s electrical installation (PEI) is defined as:
#4. Which one of the following could be considered a prosumer energy source?
#5. Which one of the following could be considered as a suitable energy storage within a PEI?
#6. The term ‘prosumer’ refers to a person or organization that…
#8. For compliance with BS 7671, A PEI should be designed to:
#9. Which operating mode must be considered during design of the electrical installation?
#10. Which one of the following safety factors must be accounted for within a PEI?
#11. Which hazard may arise if precautions are not taken when working alongside embedded generation?
#12. Means of isolation arrangements provided during design and installation should…
#13. Protection against electric shock must be maintained…
#14. Which of the following must the designer consider for the installation of storage batteries within an electrical installation?
#15. An electrical energy storage system (EESS) commonly includes…
#16. Battery storage systems may contribute fault current during…
#17. The locations of storage batteries should be selected to minimise…
#18. Emergency procedures for battery systems should include…
#19. To provide compliance with BS 7671, electrical energy storage systems should be protected against which of the following?
#20. The purpose of an EEMS is to…
#21. What is an EEMS when considering the design of a PEI?
#22. Load management may be used to…
#23. A PEI may operate in island mode when…
#24. Control systems should be designed to…
#25. Which Type of RCD should not be used within Groups 1 and 2 of a medical location?
#26. When identifying conductors within a medical location, which one of the following would be an acceptable method for the labelling of supplementary bonding conductors?
#27. The leakage current for the output winding to earth, and the enclosure, of a transformer in a medical IT system when measured in a no-load condition shall not exceed…
#28. In a medical IT system, a socket-outlet intended to supply medical equipment (ME) should be coloured…
#29. Information and communication technology (ICT) cables used within wiring systems for the distribution of DC power shall not comply with…
#30. Connecting hardware used for data cables used to distribute DC power shall support a continuous operating current of…
